This happens, and about everyone has noticed that window tint that has formed bubbles underneath. It happens to new and old tints. In case it is new, the best solution is for you to give it back to the shop that did all the work and ask them to fix it. In case it is an old job or you live too far, and you are a little adventurous with DIYs, you are going to appreciate some tips in this article.

In case after going to the auto window tinting shop there are bubbles, you should know how to get rid of the bubbles. Read this article until the end to learn more.

Why They Happen

Sometimes, bubbles become a normal part of the application, while the water gets trapped between the window tint and film. In case these do not disappear in two weeks, it is a sign that the tint was poorly applied. Debris and dirt on the window prior to application, for example, prevent adhesive from sticking to your car window. Bubbles can also happen when the tint starts to break down or the adhesive starts to fail.

Apply Heat

The tint is very easy to work on while it is hot and the adhesive and film are pliable. Heat is going to allow the adhesive to become weak and the film to become soft so that you can easily manipulate it. Your car can be left on a hot day, or you can use a heat gun or hair dryer.

Use Soap and Water

After your car windows were exposed to heat, you need a soap and water mixture. Use a spray bottle and the combination should weaken and allow the window film adhesive to become malleable. After that spray the mixture on the areas you are looking to repair. You should always keep the window tint hydrated in the entire process.

Remove Trapped Air

Sometimes, window tint bubbles are caused by trapped air underneath the window film. Therefore, the best way for you to remove bubbles is to get rid of trapped air. This should not be your first resort, but you can get rid of the window tint bubbles when you pop them using a small pin to create tiny holes and allow the air out, and let the adhesive to stick properly. Another way of handling this is by smoothing out the bubbles at an angle of 45 degrees using a squeegee. If you are able to get the angle right, it is going to lessen the air trapped in the window tint. Make sure that you are using the thinnest pin that you can find so you are not leaving anything more compared to a tiny hole in the window tint.

Use a Squeegee

This is where you press the air bubbles out of the window tint. When you do this, you would have to use a squeegee or hard plastic such as a credit card. If you have any of them, you can already proceed with getting out the air bubbles, while gently scraping them. Having too much pressure can tear the film, so you should be careful when you take out the air.

Iron Out the Bubbles

Another option is to iron out the bubbles. You should do this by using a pin to create holes so the air can come out. You need to run the iron on a low setting in order to press the bubble out.

You should contact window tint shops Springfield VA if you need the best service for car tinting.