Tinted windows are the best feature you can add to your car, and anyone who will disagree is unaware of what they are saying. Car window tinting protects you from glare, gives you privacy, and it makes your car look stylish and elegant. The unfortunate thing is that tint expires, and if you do not know how to properly remove it, you might ruin your windows.

You can remove tint in two ways – heating and scraping. However, the method you choose depends on why you are removing it. Therefore, before anything else, you should see if you need to scrape or use heat to remove the tint.

Read on to find out more now.

Soap

After you wash the car windows thoroughly and use a car bug cleaner, if necessary, the next step you can apply is a window tint remover. You must start with a gentler approach, and before you progress into forceful measures. The best option for this is to add some dish soap to some water and use a razor blade to scrape away all the edges.

Even if this does not need a lot of materials to become effective, and it requires some patience.

Hairdryer or Heat Gun

You will need a hair dryer or heat gun, a clean towel, and a window cleaner.

This is the easiest method of removing auto window tint, and you can use a hairdryer or heat gun. You can first run the hairdryer at a high temperature, and it should be about two inches from the window until you will see the glue starting to melt. After that happens, you can try prying the edge off using your fingernail.

Steamer

You can use the steamer to remove the tint and this is normally often seen as one of the easiest and quickest ways to remove it. If you do not have a steamer, you can rent one. Use the steamer on the interior and exterior of the window in order to loosen the film so you can peel it away. This is going to soften the adhesive, which makes it easier to remove the film and glue.

Newspaper

If using soap does not work, then you should add a small bit of newspaper to the equation will make the job easier. You already know how to do the soap method, which means the first steps are already done. After you spray the area using a soap solution, you must cover it with a newspaper and then leave it to soak for an hour.

You should periodically examine the newspaper that covers the window to make sure it has not become dry; doing it every 15 minutes is more than enough. If you notice the paper starting to dry, spray it with some soapy water. After an hour, the paper and tinting should fuse together, giving you a sturdier group on the tint so you can peel it away.

Scraping

You might be inclined to use a razor blade or sharp object to the window when you are down to the last bits of adhesive but you should use it with caution. You can easily scratch the window if you are unaware of what you are doing. After scratching the window, you should replace it.

Spraying

You can specifically use a formulated window tint removal spray to take off the glue residue. You can purchase these at home improvement or auto parts stores. You can easily find it there.

You can go to an auto window tinting Springfield VA anytime if you need to replace your car tint.