How Do I Stop My Window Tint from Bubbling?

Do you want to prevent the sun’s damaging UV rays from wreaking havoc on your vehicle? Undertaking auto window tinting is one of the best ways to accomplish this.

Car window tints can effectively block the sun’s UV rays. While this is the case, you should watch for window tint bubbles, which may begin to form in your tint soon. They will make your auto window tint look unattractive. They will also hinder your car’s window tint from working properly.

So, what exactly causes window tint bubbles? And how can you cure them?

The causes of window tint bubbles

Don’t worry too much if you observe window tint bubbles shortly after having your vehicle’s window tint done. Water bubbles may emerge in your auto window tint while it cures. They’ll go soon, leaving you with the ideal tint job on your vehicle.

While this is the case, the situation would be different if window tint bubbles persist after auto window tint installation. In this situation, air and/or soap bubbles may be trapped beneath the tint, causing persistent bubbles.

Most of the time, these window tint bubbles are caused by a poor window tinting job. It shows that your windows were not correctly prepped for auto tinting. Window tint installers will usually have to remove the tint and repeat the tinting procedure to make things right.

Tint bubbles may also emerge after your car’s windows have been tinted for an extended period. In this situation, the bubbles could suggest that the adhesive on your tint failed after exposure to the sun’s UV rays for so long.

In this case, you can try to get rid of the window tint bubbles if you want. However, if the adhesive is no longer effective, it will not always be possible.

How to fix window tint bubbles

If you recently had your auto window tint installed and are already noticing window tint bubbles, don’t hesitate to return your car to the shop that did the work. Most places have warranties on their auto window tint, which allow you to resolve this problem at no extra cost.

However, if you’ve had your car’s windows tinted for a while, your tint guarantee may no longer apply. It may be up to you to remove the tint bubbles. The good thing is that there are plenty of ways you can go about it. These ways include:

Squeezing the bubbles

Many people prefer to squeeze out the bubbles. It’s simple, takes less time, and is safer than the other options. First, you’ll need something to heat the bubbling region, such as a hair dryer, heat gun, hot air gun, blow torch, hot water, or simply exposing your automobile to the hot sun for a few hours.

If you use a heating tool with high heat settings, only apply the heat for a few seconds; otherwise, the tint may be damaged. After heating the bubbling region for a few seconds, use a squeegee to push the air bubbles out of the tint.

If you don’t have a squeegee, use any small, flat, rigid plastic, such as a credit card or library card, and continue squeezing and pushing the bubbles out.

Using pin

Another popular approach for removing bubbles is to use pointed pins or needles. To prepare for this stage, soften or heat the window tint to make the adhesive malleable and facilitate working processes. Then, spray cold or soapy water on the tint to soften the glue and rapidly remove the air bubbles.

After that, make tiny holes in each bubble to allow the air to escape. You don’t have to worry about gaps in the tint because they may mend when exposed to low heat, such as sunlight. While this is the case, avoid making large punctures or tearing the tint; otherwise, the tint may be permanently destroyed.

Using iron

You can fix bubbles with an iron if you don’t have squeezing plastic or heating equipment. The iron can accomplish both: it can heat the area while removing bubbles.

This means you must use extreme caution when working with the iron in the dark. If the surface becomes too heated, the iron can harm the tint. You can avoid overheating by using the lowest temperature setting, but achieving satisfactory results will take time and patience.

Reinstalling the tint

In rare cases, the bubbles are too large to be removed with pins or squeezes and adequately repaired. If this occurs, you should remove the tint and reapply it.

When doing it, make sure to replace it correctly with the assistance of professionals; otherwise, it may become misplaced or cause even more bubbles.

Why you should remove tint bubbles

You could get away with driving around in a car with tinted windows that contain bubbles, but it would have a negative effect.

No matter how good the rest of your automobile looks, people’s attention will be drawn to the tint bubbles. They will detract from your car’s appearance and make you wish the tint bubbles were gone.

Window tint bubbles can damage more than just your car’s appearance. They may also affect its ability to withstand UV rays from the sun. These UV rays can enter your car since the tint bubbles will prevent your tint from blocking them.

Working with a reputable company to remove and reinstall the tinting material

As previously mentioned, you can remove window tint bubbles on your own if you prefer that method. At the same time you can hire an auto tint shop Springfield to help you remove these bubbles.

Just make sure to opt for a reliable auto window tinting provider with experience removing tint bubbles. The business should be able to explain how it will remove window tint bubbles from the start.

This is also the type of firm you should hire to handle auto window tint installation from the beginning. They will prevent tint bubbles from appearing in the first place.

The key to hiring a reputable and worthy company is doing as much background research as possible.