So, you want to determine what is the best paint protection film is? You can also go to a car window tinting shop because they normally know how to do this as well. If you do not know where to get started, you should first be aware of how to properly choose your car.

Quality is very important, and you do not want to spend money on something that is not good enough for you. Read on to learn more on how to make the best choice when it comes to this.

The Manufacturer

Are you aware of the largest company that has been in the market for a very long time? That is 3M. This company has an exclusive focus on paint protection film and they have an impeccable reputation in the entire automotive industry and they have developed technological advances when it comes to hydrophobic films.

Level of Protection

The best feature of car protection films is the level of protection they can give. The best types of films are offering a superior barrier against oil, bugs, V damage, rock scratches, flying debris, dirt, and other hazardous elements.

The thickness should be about 6 millimeters and it is recommended for top-tier protection. Most of the time, low-quality films are thinner.

Hydrophobic Properties

It is true that if your car is used every day and you must wash it every few weeks, and the hydrophobic properties are nicely built into the film. However, you might want a ceramic coating on top of the clear bra, which gives you the advantage of a hydrophobic surface. Therefore, this question is related to your plans of protection beyond the paint protection film, as well as how you want to take care of your vehicle.

Transparency

The whole purpose of paint protection films is to maintain the paint’s brand-new look, and not as a cover-up, distortion, or to change how the paint looks. Premium car films are clear to anyone and that transparency should be maintained throughout the years.

Previous generations of paint protection films become yellow after some time, but eventually, it was discovered that the adhesive is the one that turns yellow instead of the film itself. Since then, manufacturers came up with adhesives, that are not prone to discoloration.

Self-healing Ability

There are now self-healing paint protection films. The scuffs, small scratches, and spray paint disappear with little heat applied to the PPF.

The heat is caused by PPF, so it returns to the low-energy state, where the appearance is seamless and smooth. The spray paint and unwanted substances wipe off when the heat is applied, which reveals the film’s perfect finish again.

Materials

The raw materials of paint protection films are:

• Polyester – This is the base layer that helps secure the PPF car paint.
• Acrylic Adhesive – The paint protection film requires acrylic adhesive to bond the paint. A good quality one has a well-balanced blend to make sure the PPF is not damaging to the paint surface.
• Polyurethane – This is the main material of pant protection films and its thickness is normally 0.152 mm.
• Clearcoats – Clearcoats enhance the surface qualities, blocks the UV rays, and prevent water or liquid saturation.

You need to find the best paint protection film installers in Springfield VA, so they can properly do the job and make your car look stunning.