Auto glass tinting is not invincible against the sun exposure effects. After many years of sun exposure, the adhesive that was used to bind the tints to when the window glass begins to break down. This is what causes the film to slightly detach from the edges. Unfortunately, in other cases, it does not even take years of being exposed to the sun. Some installers used poor-quality tints, which has increased the possibility of something that is going wrong over the tinting material’s lifespan.

If you notice that your car window tints are beginning to peel, it can be because of poor installation as well. Find out from this post what you can do to deal with peeling auto window tints.

Clean the Window

You should first clean the window and then use a cleaner and microfiber cloth to get rid of any dust, dirt, or grime from the car window. This is going to help a new window tint stick better to the auto glass. After that, you can wipe the glass using a microfiber cloth until you completely clean everything. In case the window is dirty, you might have to repeat this step a couple of times.

How to Fix the Window Tint Glue

In a bowl, make the soap solution, put the solution in a spray bottle, and then spray it on the glass to soak all the adhesive residue. After that, scrape off the adhesive using a knife. You should keep spraying the glass while doing so in order to maintain moisture in the area. After that, clean the window using a glass cleaner and paper towels.

Apply Tape

In case the peeling is only in small areas, you can attempt to repair it by applying the tape. You can first remove any dirt around the peeling tint using a window cleaner and microfiber cloth. After that, cut a larger piece of tape. It should be larger than the peeling section. Apply it to the peeling area, and be sure to smooth out air bubbles.

You Can Use Alcohol

This is a very simple hack because window tint is soluble in alcohol or ammonia, which indicates that you can use substances to break down the adhesive bonds. The best way to do this is to spray ammonia or 90% isopropyl alcohol straight onto the window film.

Razor Blade

In case the peeling tint is in a small area and you are unable to reach it with tape, you can use a razor blade to try removing it. First, you need to ensure that the area is wet so the blade will not scratch the window. After that, place the blade at an angle of 45 degrees and then scrape the tint away gently. You should be careful not to scratch the window.

Install Tint on Top of the Peeling One

You can apply tint on the existing factory tint. A tint with a comparable hue is required, and the application calls for professional assistance.

Ask a Professional to do it For You

In case you try replacing tints yourself or let an amateur do the job, there is a risk that you can damage the window glass of your vehicle. It can reach a point where the replacement turns into needing a window glass replacement. When you talk to a professional, you can be sure that they are paying close attention to the important regulatory questions.

Everything is set into play that helps protect your car’s glass.

You can contact the window tint shops Springfield VA anytime you need the replacement to be done professionally.