Auto glass tinting is a great way to give your vehicle some style. It is simple, but you can have privacy while driving. Therefore, without proper care, tinting your car’s window can bubble and break down through time.

If you recently got your car window tinted, you should know how to maintain it so that you do not have to pay for replacement too soon. That is because they do not last forever, but with the right maintenance, their condition stays the same for a long time.

This is not an uncommon process to pay for, and you need the following tips mentioned in this article on how to maintain your car’s tint. Read on to find out more.

Care for the Car Tint

Once the car window tint is installed, you must wait for the tint to cure. The time when each window is drying up is the curing time. This process takes a few days to complete, which can take from a week to 1 month.

It is very important to allow the curing process to finish. In case the moisture fails to evaporate, there is a tendency that the moisture remains. You do not want this to happen because moisture causes a hazy appearance, making it difficult to maintain your window tint.

Keep Your Windows Rolled Up

You should leave your windows up after the installation. Drivers can feel the benefits of having their car windows tinted, but the adhesive is not the same thing. Based on the kind of tint, it takes 2 to 4 days for the glue to completely finish the setting.

You should remember this rule especially if your window tints do not have insurance or do not have guarantees. For instance, if you want to tint your vehicle, you most likely do not have this guarantee compared to people who had it professionally done.

Spot Any Imperfections

In case the curing process is not working the way it’s supposed to be, you might see the imperfections. The common imperfections include bubbles. Fortunately, you can remove the bubbles using a plastic card.

You can use microfiber cloths to wrap the plastic card. Use it to push the bubbles to the edge. This must be done carefully to avoid damaging the tints.

After that, choose to poke a small hole in the bubbles using a sharp needle. This releases the air inside the bubbles. You will see the bubbles disappearing.

Do Not Use Abrasive Cleaners

When you wash the windows’ tinted sides, do not use abrasive cleaners. Those chemicals eat away the window tint material or cause discoloration. Even using household items for cleaning like baking soda and vinegar should not be used to clean car window tints. You should choose water and soap instead to clean those areas.

Car Window Tints are Not Invincible

Tints are scratch-resistant and high-quality, but they can get damaged. The light scratches caused by your kids and pets are fine, but those caused by the sharp objects or hard edges cause a bigger problem.

By having this in mind, you should be careful in unloading and loading anything with sharp edges. People who do not notice how the metal bucket hits the windows can cause the tint to tear up.

Use Soft Cloths to Clean Your Car Window Tint

When you dry or scrub the car window tints, make sure to only use a soft microfiber cloth because using rougher ones can cause the tint to peel off.

You can go to an auto tint shop Springfield VA if you want to have your car’s window tinted.